CPU-Z (freeware)

Post by **NightStorm** » Thu Oct 25, 2007 4:20 am

CPU-Z is a freeware that gathers information on some of the main devices of your system.

[b]CPU[/b][list]
[*]Name and number.
[*]Core stepping and process.
[*]Package.
[*]Core voltage.
[*]Internal and external clocks, clock multiplier.
[*]Supported instructions sets.
[*]Cache information.
[/list][b]Mainboard[/b][list]
[*]Vendor, model and revision.
[*]BIOS model and date.
[*]Chipset (northbridge and southbridge) and sensor.
[*]Graphic interface.
[/list][b]Memory[/b][list]
[*]Frequency and timings.
[*]Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table.
[/list][b]System[/b][list]
[*]Windows and DirectX version.
[/list][quote name=\'CPU-Z Readme File\']CPU-Z Readme file
------------------

Version 1.41
September 2007
Contact : cpuz@cpuid.com
Web page: [url=\"http://www.cpuid.com/cpuz.php\"]http://www.cpuid.com/cpuz.php[/url]
Validation page : [url=\"http://valid.x86-secret.com/\"]http://valid.x86-secret.com/[/url]
Forum : [url=\"http://forum.x86-secret.com/forumdisplay.php?f=16\"]http://forum.x86-secret.com/forumdisplay.php?f=16[/url]
CPUID SDK : [url=\"http://www.cpuid-pro.com/devkits.php\"]http://www.cpuid-pro.com/devkits.php[/url]

CPU-Z is a freeware and can be freely distributed.

Configuration file (cpuz.ini)
------------------------------

The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :

[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=ON
MaxPCIBus=256
DMI=ON
Sensor=ON
SMBus=ON

- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF disables sensor chip detection and voltages measurement.
- PCI : Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision.
- SMBus : Set to OFF disables SMBus information : SPD, and, depending on the hardware, sensoring information.

Parameters
----------

-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.

-html=filename : Same as "-txt" except it generates the html report.

-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).

Keys
----

F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory

Cache Latency Tool
------------------

The cache latency tool is now a stand-alone program that is included in the CPU-Z package.[/quote][b]Supported Hardware[/b][list]
[*]Processors
Intel® Pentium™, Pentium™ MMX, Pentium™ Pro, Pentium™ II, Pentium™ !!!, Pentium™ !!!-M, Pentium™ 4, Pentium™ 4-M, Pentium™ M, Pentium™ D, Pentium™ XE, Pentium™ Dual Core, Core™ Solo, Core™ Duo, Core™ 2 Duo, Core™ 2 Quad, Core™ 2 Extreme, Celeron™ (P2/P3/P4/PM/CL) and Xeon™ (P2/P3/P4/C2D/C2Q) ;
Itanium™, Itanium™ 2 ;

AMD® Am5x86, K5™, Geode LX, K6™, K6™-2, K6™-III, K6™-2+, K6™-III+, Athlon™ (4, XP, MP), Duron™, Sempron™ (K7/K8), Athlon™ 64, Athlon™ 64 X2, Turion™, Opteron™, Athlon™ FX, Phenom™ ;

VIA® C3™ (Samuel, Samuel2, Ezra, Ezra-T, Nehemiah), C7™, C7™-M ;

Transmeta® Crusoë™ TM3200, TM5400, TM5500, TM5600, TM5800 ;

[*]Chipsets
Intel® i430TX, i440LX, i440FX, i440BX/ZX, i810/E, i815/E/EP/EM, i840, i845, i845E, i845G, i850/E, i845PE/GE, E7205, E7500, E7520, i852, i855, i865P/PE/G, i875P, i915P/G, i915PM/GM, i925X/XE, i945P/PL/G/GZ, i945PM/GM/GT, i955X/XE, P965, Q965, G965, GL960/GM965/PM965, i975X, P35, G33, G31, Q35, Q33, X38 ;

VIA® Apollo VP3, Apollo Pro, Apollo Pro +, Apollo Pro 266, KX133, KT133(A), KT266(A), KT400(A), KT600, P4X266(A), PT880, PT880 Pro, K8T800, K8T890, K8T900, P4M800CE, P4M890, P4M900, CX700/VX700 ;

NVIDIA® nForce, nForce2, nForce3, nForce4, nForce4 SLI Intel Edition, GeForce 6100/6150 (nForce 410/430), nForce 520/550/560/570/590, 650i, 680i, MCP73 ;

ATi® RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 ;

SiS® 645, 645DX, 648, 648FX, 649, 655FX, 655TX, 656, 662, 735, 756, 761GX, 760, 760GX, 755, 755FX, 741, 741GX, 671/FX/DX/MX ;

AMD® AM-751, AM-761, AM-762 (760MP) ;

[*]Memory
SDR, DDR, DDR2, FB-DDR2, DDR3, RDRAM (Rambus®) ;
EPP and XMP extended profiles ;
[/list]

*EDIT* Attachment removed due to updates. Please see further down in the thread for the new file.

Josh · Post by **Josh** » Thu Oct 25, 2007 10:33 pm

This is a nifty little program ^.^

Post by **NightStorm** » Sun Jun 14, 2009 5:41 pm

Version 1.51 is now out. See the changelog below:

[b]Version[/b]	[b]Date[/b]	[b]News and corrections[/b]
[attachment=0]cpuz_151_setup.zip[/attachment]	4/28/2009	[]New version with installer (setup). []NVIDIA ION platform. [*]Intel \"Clarkdale\" processor preliminary support. [/list]
1.50	2/14/2009	[]Improved support for AMD Phenom II processor. []New Intel Core i7 models. []Support for NVIDIA 740i chipset. []Several bug fixes. [/list]
1.49	12/4/2008	[]AMD Phenom II processor. []New Intel Core 2 models. []Improved loading time. []New online validation process. [*]New [b]Hall of Fame[/b]. [/list]
1.48	10/15/2008	[]Improved support for Intel Core i7 (Bloomfield & Gainestown). []Intel Atom dual-core version support. []AMD Athlon \"Kuma\" processor support. []Alternate clock computation method based on \"duty cycles\" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini) [/list]
1.47	08/27/2008	[]Intel Core i7 processor. []Intel Core 2 Duo S Mobile processors. []NVIDIA MCP79/7A chipset. []AMD 790GX / SB750 chipset. [/list]
1.46	06/27/2008	[]AMD Puma platform (Turion & Turion Ultra \"Griffin\"). []AMD Black Edition processors. [*]Intel Xeon EX \"Dunnington\". [/list]
1.45	05/10/2008	[]Intel Atom Z500/Z510/Z520/Z530/Z540 processors. []Intel Core 2 Duo E7x00 processor. []AMD 45 nm Phenom (Dened & Shanghai) processors. []Intel P45 chipset. [/list]
1.44.2	03/29/2008	[]NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2). []Intel G35 chipset (1.44.2). []Updated support for VIA chipsets (1.44.2). []Support for the new validator (1.44.1). [] Preliminary support for VIA Isaiah processor. [] Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden. [] Memory timings on Intel 5400A/B MCH (Skulltrail). [] Fix AMD Phenom detection issue on Windows Vista 64. [/list]
1.43	01/06/2008	[] Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH). [] Intel X48 chipset detection. [] AMD Athlon 64-LE 1600 and 1620 support. [] Fix detection issues on unlocked Phenom (ES/BE). [/list]
1.42	11/23/2007	[] Intel Wolfdale/Yorkfield/Penryn CPUs support. [] AMD Phenom and Opteron Barcelona support improved. [] Current core selection menu (right click on the CPU page). [] Loading progress. [/list]
1.41	09/04/2007	[] New CPU voltage monitoring. [] Intel Xeon Tigerton support. [] Intel IA64 CPUs support (Itanium / Itanium2). [b] Special thanks to Rami Radi and Ray Hinchliffe for their help.[/b] [] AMD K10 Phenom preliminary support. [] NVIDIA MCP73 support. [] Intel XMP profiles support. [*] Memory modules nominal voltage. [/list]
1.40.5	07/06/2007	[] NVIDIA nForce 560 chipset support (1.40.5) [] Intel Dynamic FSB technology support (1.40.5) [] Athlon 64 X2 BE & Sempron LE (TDP 45W) (1.40.5) [] SiS671/FX/DX/MX northbridge support (1.40.5) [] SiS968 southbridge support (1.40.5) [] VIA P4M800CE chipset support. [] Preliminary support for Intel Penryn CPUs family (45 nm). [] Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition. [] Intel P35, G33, G31, Q35, Q33, X38 chipsets support. [] Intel GL960/GM965/PM965 chipsets support. [] AMD Athlon 64 \"Lima\" processor support. [] AMD Geode LX processor support. [] NVIDIA nForce 520 chipset support. [] New parameter \"-console\" to generate output in a command prompt (Windows XP only). [*] New icon, courtesy of Techlogica. [/list]