Front USB Ports

Moderators: Moderator, Global Moderator

Post Reply
Vercz
Hero Member
Hero Member
Posts: 1915
Joined: Sat May 08, 2004 11:13 pm

Front USB Ports

Post by Vercz »

stuck with an old computer that only has usb ports at the back? i know i was, and it was damn annoying... now with this short, easy tutorial, you too can have usb ports at the front! [/salesperson]

alrighty, first things first. equipment list (this is what i used)

USB Card - MUST have at least one internal port. (from memory these are ~ $40 AUS) [url="http://www.killanet.net/uploads/usb_mod%20001.jpg"](Image)[/url]
USB Cable - Male to Female connection (~ $5 AUS) [url="http://www.killanet.net/uploads/usb_mod%20002.jpg"](Image)[/url]
Screwdriver
Pencil
Drill
Safety Equipment (Face Shield/Goggles and Ear Muffs/Plugs)
Hack Saw Blade
Superglue

Step 1. Remove Case, and front panel of computer

Step 2. Mark out on front panel where you would like the usb port to be, tracing around the female usb connection for correct size (can be anywhere) [url="http://www.killanet.net/uploads/usb_mod%20004.jpg"](Image)[/url] [url="http://www.killanet.net/uploads/usb_mod%20005.jpg"](Image)[/url]

Step 3. Use a drill to carefully drill through front panel, getting as close to the edges as you can

Step 4. Carefully remove the corner plastic, as to make the hole somewhat rectangular

Step 5. Place The Female end of the usb cable in the slot you've just made (you made need to make minor adjustments) [url="http://www.killanet.net/uploads/usb_mod%20006.jpg"](Image)[/url]

Step 6. When you're happy with the position, use the superglue to stick the cable end to the case, be careful not to get any glue inside the open port.

Step 7. Depending on your case, you may be able to thread the cable through the metal frame, or you make have to drill through

Step 8. Plug in the Male end of the cable into the USB card, then re-assemble case. [url="http://www.killanet.net/uploads/usb_mod%20007.jpg"](Image)[/url]

any questions/comments, please feel free.
Image

Image
Josh
Hero Member
Hero Member
Posts: 4627
Joined: Fri Jun 04, 2004 7:54 am

Front USB Ports

Post by Josh »

hmmm... I'm stuck with usb in the back, but I'm too afraid to even begin to do this /blum.gif' class='bbc_emoticon' alt=':P' />
[align=center]

Image

“If you stop learning, you stop living.” ~Tami Quiring

“It's the rare man who understands the value of a single perfect rose.”

[/align]
Brock
Sr. Member
Sr. Member
Posts: 262
Joined: Wed Jun 16, 2004 5:37 pm

Front USB Ports

Post by Brock »

Sweet. I did this to an old computer of mine. See the computer I have at the moment though has the ports on the front but...the motherboard doesn't have the
Post Reply

Return to “Builds & Mods”